- This series nozzle does not need air assist, the system device is simple
- The spray mist point is small, the atomization is sufficient, energy and water saving, the cost is low, the effect is good
- The stainless steel spray is processed by advanced forging and pressing process and is durable. It is 2.5 times the life of a similar nozzle.
- This nozzle can completely use the pressure of tap water to atomize, use of high-pressure water pumps more effective.
- Length: 10m/32.81ft
- Material: plastic
1. It is recommended that the atomization system be installed at the height of 2.5m-3m.
2. Connect the adapter to the tap.
3. Open the faucet cleaning system for 1 minute, to clean the system and remove impurities.
4. Screw the spray nozzle into the three-way fitting, except for the end of the nozzle.
5. Turn on the faucet cleaning system for 2 minutes, to ensure the system is fully cleaned.
6. Close the water and install the last nozzle to the joint, and use the end plug.
7. Fixed the atomized pipe through the provided cable strap.
8. Open the faucet until the sprayer works, and enjoy the cooling atomization system.
9. When the atomization system is not used for a long time, close the nozzle and keep it dry and clean
15 X Sprayer + Base
15 X Nylon Cable
1 X 10m Pipe
1 X Water Pipe Adhesive Tape
1 X Water Pipe Joint