S154 Diy 10m Misting Kits Including 15pcs Mist Nozzles 13pcs Nozzle Fittings Cooling System
S154 Diy 10m Misting Kits Including 15pcs Mist Nozzles 13pcs Nozzle Fittings Cooling System

S154 Diy 10m Misting Kits Including 15pcs Mist Nozzles 13pcs Nozzle Fittings Cooling System

98% of buyers enjoyed this product!
List price:
Price:
You save:
(%)
List price:
Price:
You save:
()
()
Free Shipping on all orders
Total Price:
Quantity:
View cart
  • 100% Money Back Guarantee
  • 100% Secure Payments
Product Details
Product Details

One set 10M DIY misting system packing list:
10m tubing in roll
15 misting nozzles(2 for spare, brass body with Stainless steel orifice)
13 plastic nozzle fitting (Tee connector)
1 water tap adapter(push-lock fitting)
1 hose connector
1 water inline filter
20 cable ties
20 saddle clamps
1 end plug
1 tubing cutter
1 Instruction

?(all other items in photos are for illustration only)

Description:

Nozzle Orifice: 0.1mm-0.8mm nozzles orifice option

Nozzle Material: Brass body with stainless steel orifice inside.

Nozzle Thread: 10/24UNC

Standard water tap adapter: Thread Size – 3/4″
Mist hose: Food grade material, 1/4″ size;
Function: Can work under normal water pressure(2-3kg).

Hose:

Nozzle:

Fitting:

Adapter:

Filter:

Cable ties and Clamps:

End plug:

Design Features

The brass fine atomizing nozzle is a brass main body with a stainless steel nozzle core and stainless steel guide vane.
The liquid forms a centrifugal vortex in the guide vane, and the fine hollow mist particles are sprayed from the nozzle hole, which can be widely used in factory humidification, cooling, salt spray testing, artificial fog and other humidification sites.
Testing one by one in our laboratory:
?
Instruction as below:
  • Installation Steps:
    1. It is recommended to installed the misting system at a height of 2.5m-3m.
    2. Determine the locations of each nozzle according to the aeras where you want to cool.
    3. Measure the distance and cut the tubing as per your requirement.
    4. Connect the tubing with the push lock fittings (Water tap adapter – 6Tees – End plug) to make the complete system.
    5. Connect the adapter to the water tap.
    6. Turn on the water tap to wash the system for 1 minute to purge the system and remove any impurities.
    7. Screw the misting nozzles to the Tee fittings, except the last one on the end plug.
    8. Turn on the water tap to wash the system for 2 minutes to insure that the system is fully purged.
    9. Turn the water off and install the last nozzle into the fitting with the end plug.
    10. Fix the misting line by the saddle clamps provided..
    12.Turn off the nozzles, keep them dry and clean when you don’t use the misting system for a long time.

Application as below:
Landscaping, cooling, air humidification, spray disinfection, epidemic prevention, deodorizing air purification, etc
Note: Soaking the misting nozzle in cleaner periodically to remove mineral deposits, thus can prolong its lifetime.
© Copyright 2023. All Rights Reserved


Best Seeds Online
One Business Center
Blankenstein 132
7943 PE Meppel
The Netherlands


E-mail: support@bestseedsonline.com
Phone: +31682860910

Shopping cart

×